The Acolyte – Sith Saber 3D Printer Model
The file 'The Acolyte – Sith Saber 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'The Acolyte – Sith Saber 3D Printer Model' is (stl) file type, size is 1.7MB.
The lightsaber used by the Sith character in Star Wars - The Acolyte.
Print everything in orientation, Grip1Lower, Grip4Lower, Grip4Upper, and EmitterCore require support. Clip will require support.
Model is WIP while I get better reference images and test print it myself.
Update 6/2: Rings4 fixed (increased from 3 to 4 segments). All Rings diameters decreased by ~0.5mm to hopefully ease assembly.
Update 6/3: Modified Clip with a better fit. Fully printed and assembled saber.
| Clip.stl | 1.4MB | |
| EmitterCore.stl | 2.3MB | |
| EmitterLower.stl | 89.1KB | |
| EmitterUpper.stl | 175.9KB | |
| Grip1Lower.stl | 28.8KB | |
| Grip1Upper.stl | 495.0KB | |
| Grip2Lower.stl | 103.4KB | |
| Grip2Upper.stl | 388.1KB | |
| Grip3Lower.stl | 101.1KB | |
| Grip3Upper.stl | 378.8KB | |
| Grip4Lower.stl | 114.5KB | |
| Grip4Upper.stl | 426.7KB | |
| Pin.stl | 684.0B | |
| PommelCap.stl | 60.2KB | |
| Rings1.stl | 2.2MB | |
| Rings2.stl | 2.3MB | |
| Rings3.stl | 1.9MB | |
| Rings4.stl | 1.6MB | |
| Switch.stl | 1005.6KB |
