The $2 Curtain Rod System – IKEA STYLE 3D Printer Model
The file 'The $2 Curtain Rod System – IKEA STYLE 3D Printer Model' is (SLDPRT,STL,tif,IGS) file type, size is 3.2MB.
The file 'The $2 Curtain Rod System – IKEA STYLE 3D Printer Model' is (SLDPRT,STL,tif,IGS) file type, size is 3.2MB.
The $2 Curtain Rod System.
Designed to work with ikeas $1 small curtain rods (002.213.94)
Curtain Rod Specs
http://www.ikea.com/us/en/catalog/products/00221394/
4 Rod length choices
2 Colors
Low Cost - High Quality
Hanger Specs
-Easy to install and high strength.
-Low print time
-2 Hours of printing time per window set
-Ultra low replacement cost / upgrade
-Snap and Press Fit assembly
Cost to 3D Print Hanger Set - $.35
Cost to 3D Print End Caps - $.65
Cost for Ikea Rod - $1
I could not deal with the fact that hanging a piece of tubing over your window has to cost more than $10 a window.
The sizing is dead on with .25MM layer thickness and 5% infill and 1 shell.
If you want to hang a monkey off the hanger I would recommend printing with 2 shells and a .17mm layer thickness and 20% infill.
I don't condone the hanging of monkeys.
| END_CAP_DECO_LARGE_END.SLDPRT | 278.0KB | |
| END_CAP_DECO_LARGE_END.STL | 656.7KB | |
| END_CAP_DECO_SMALL_END.SLDPRT | 257.0KB | |
| END_CAP_DECO_SMALL_END.STL | 699.9KB | |
| Ikeadollarrod.tif | 665.0KB | |
| LEFT_SIDE_-_LARGE.IGS | 743.6KB | |
| LEFT_SIDE_-_LARGE.SLDPRT | 528.0KB | |
| LEFT_SIDE_-_LARGE.STL | 791.2KB | |
| RIGHT_SIDE.SLDPRT | 549.0KB | |
| RIGHT_SIDE_-_SMALL.IGS | 715.7KB | |
| RIGHT_SIDE_-_SMALL.SLDPRT | 537.5KB | |
| RIGHT_SIDE_-_SMALL.STL | 751.7KB |
