TFV-18 Drip Tip 3D Printer Model Free Download

Description Files (1)

Summary

This is a drip tip for the TFV-18 tank. It's designed to be used with the factory O-rings that are on the tank. I may upload a version that works as a press on for those without O-rings

Only use this for 24hrs before discarding the tip. Even if you use PETG you're still running the risk of bacteria build up. You can use PLA and PETG, both are chemically stable and don't leech chemicals, but please throw it way after 24hrs of use. I normally print 4 of them on a build plate using the "One at a time" print sequence in Cura.

Settings -

100% Infill. You can do a lot less, but the difference is super small.
Walls - 3 - 4
Supports - No
Brim - Yes for easy printing. It can be done without it, but use the extra plastic and do a brim.

If printing on a super accurate printer, scale it down by 1% to 99%. Should do the trick. My A1 mini requires this change for a proper fit.

Uncheck uniform scaling and adjust the Z if you want it taller or shorter.

I also uploaded a little organizer that holds 4 of these drip tips and has the TFV-18 name on it. I may upload alternate versions with no lettering if people prefer that.

TFV18_Drip_Tip.stl

25.1KB

TFV-18 Drip Tip 3D Printer Model

Summary

Tags

You might also like