Make your miniature bases and DnD tiles in easy way!
This is just a free sample, the full set contains STL files that allow you to print 10 different Texture Rollers and a Tile Maker. You can find in here: https://3dhexes.com/product/texture-rollers-1/
Printing:
It is recommended to print Texture Rollers using the lowest possible layer height, such as 50-100 microns - especially for such a detailed texture as the Bark.
Test prints were made with 15% fill.
Supports are not needed.
Use instructions:
Put the appropriate putty/clay on the chosen surface. Smooth the surface using, for example, a roller or other cylindrical object (even spray can).
Move the Roller over the putty/clay applying equal pressure at all parts.
You can use a lot of different materials. Some require proper preparation, check the manufacturer's recommendations. The easiest to use material is polymer clay.
Popular materials for use with these Rollers are also Green Stuff and Milliput.
Remember to keep your Roller clean.
Mosaic_1.stl | 32.1MB | |
Mosaic_1_1inch_hollow.stl | 32.2MB |