LED light bar for the Tevo Tornado. Designed to be controlled by gcode commands. I have uploaded STL files to build a full or half configuration of the light.
To build the light you will need a soldering kit! and have basic knowledge of electrical wiring. I attached a picture of a basic electrical circuit you will need to build/assemble to power/control the light.
I used the custom control plugin for octoprint to make a quick access on/off button (https://plugins.octoprint.org/plugins/customControl/)
G-code Terminal Commands: (On - M42P69S255) & (Off - M42P69S0)
Supplies you will need:
LED light strip i used (https://www.amazon.com/gp/product/B00HSF66JO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)
24v to 12v converter - i used (https://www.amazon.com/gp/product/B01LY4RANA/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1)
Mosfit - i used (RFP30N06LE)
Wire - i used (#22 gauge solid, insulated copper wire)
the rail clamp is threaded to work with the screw i designed. it will be very snug at first when you put the screws in. i recommend screwing them on and off a few times to break-in the threads.
For the Full version you need to print:
2 - light bar
2 - full top bracket
2 - full rail clamp
4 - screw
For the Half version you need to print:
2 - light bar
2 - half top bracket
1 - Left Rail Clamp
1 - Right Rail Clamp
4 - screw
Updates:
09 NOV 2019 - added upgraded designs
| full_rail_clamp.stl | 604.5KB | |
| full_rail_clamp_MK2.stl | 606.6KB | |
| full_top_bracket.stl | 229.9KB | |
| full_top_bracket_MK2.stl | 200.3KB | |
| half_top_bracket.stl | 184.3KB | |
| Left_Rail_Clamp.stl | 599.6KB | |
| light_bar.stl | 138.9KB | |
| light_bar_MK2.stl | 269.6KB | |
| mosfit_case.stl | 35.0KB | |
| mosfit_case_lid.stl | 17.8KB | |
| Right_Rail_Clamp.stl | 602.8KB | |
| Screw.stl | 1.1MB |
