TEVO Tarantula Requiem X-carriage (original By XADJ) 3D Printer Model

License: CC BY
File formats: STL
Download type: zip
Size:51.2KB

The file 'TEVO Tarantula Requiem X-carriage (original By XADJ) 3D Printer Model' is (STL) file type, size is 51.2KB.

Summary

I've used the original design by XADJ (https://www.thingiverse.com/thing:2096175) and adjusted it to my needs. Thanks to the original designer.

All you need is two M4x15 or longer bolt / nut sets.

  • Adjusted the spacing between the wheel holes so a tighter mount is possible
  • Increased the size for the M4 bolt / nut sets to mount the E3D
  • Added more convenient space to place the nuts for the E3D mounting
  • Added two small slits to use a tie wrap to gather the cables coming from the hot-end (See picture)

  • Note: eccentric nut doesn't need to be turned all the way for a tight fit, play with it until it feels tight enough and can still run smoothly over the X-axis.

In the picture it is printed at 0.3 mm height, 40% infill.

20170520_v1_requiemBase.STL 673.5KB
20170520_v1_requiemFront.STL 221.1KB