The file 'Tevo Tarantula Modular X-carriage For E3d Dual Chimera Or Dual Or Single E3d V6 With Integrated Fan 3D Printer Model' is (stl) file type, size is 1.1MB.
another x-axis carriage
replaces the dual chimera acrylic part and offers modular parts for one or two e3d v6 hotends.
2017-07-03
Added a second version of the dual extruder module. The 1mm spacing is fine - in theory. Added 1mm more to an offset of 33mm. My heater blocks distance is < 1mm, the screws (heat cartridge) hit each other.
2017-09-14
new dual_e3dv6_2x V3.stl
it depends on the printer, with the tarantula and a dual integrated fan (look at my things and the remix), the right fan would crash into the upper wheel.
2017-09-22
version V3 was a crap. the distance was 32mm and the nut-holes were slightly out of the center of the hole...
V4 is now right: 33mm distance between the hotends, 4mm z-drop and correctly alligned nut-cutouts. have fun.
| chimera_modular_x_carriage_new.stl | 222.7KB | |
| clamp.stl | 577.8KB | |
| dual_e3dv6.stl | 1.5MB | |
| dual_e3dv6_2x_V2.stl | 479.3KB | |
| dual_e3dv6_2x_V4.stl | 451.0KB | |
| e3dv6_1x_v2.stl | 307.0KB | |
| modular_X-carriage.stl | 2.9MB | |
| single_e3dv6.stl | 216.2KB | |
| thing_1362169_dual_chimera.stl | 1.4MB |
