Just another spin on the mysquared2015 mount.
Made a few things easier to print.
Standard hardware, no nut inserts. I had extra m4 Tslot nuts so setup for them.
The holes are all m4, but will want to use m3 for the e3d caps if using regular nuts.
Tolerances are snug enough you could prob get away with just threading the bolts in if you are brave.
Update 7/19/16
Sounds like Tevo has made a revision to the wheels and the holes on the z car may be too wide to get snug. r0n_dL has made a remix to address this http://www.thingiverse.com/thing:1680866
Update 4/19/16
Beta version is working great, I suggest using that one.
My Chimera came in so drew up a mount for it (Cyclops also).
Update 3/22/16
Been running the beta for a few days and the locks work awesome!
Printer prob needs to be fairly dialed in to print the small teeth on the locks.
Also running with the hardware threaded directly in and it is holding tight.
| Hagstrom.STL | 329.2KB | |
| R_Base_Mount.STEP | 70.3KB | |
| R_Base_Mount.STL | 55.1KB | |
| R_Belt_Lock_Beta.STEP | 244.8KB | |
| R_Belt_Lock_Beta.STL | 356.2KB | |
| R_Chimera.STEP | 169.6KB | |
| R_Chimera.STL | 362.8KB | |
| R_E3d_1x_Mount.STEP | 150.8KB | |
| R_E3d_1x_Mount.STL | 147.2KB | |
| R_E3d_2x_Mount.STEP | 196.2KB | |
| R_E3d_2x_Mount.STL | 199.1KB | |
| R_E3d_Cap.STEP | 72.5KB | |
| R_E3d_Cap.STL | 117.6KB | |
| R_Stock_Mount.STEP | 144.9KB | |
| R_Stock_Mount.STL | 294.7KB | |
| R_X_Car.STEP | 187.8KB | |
| R_X_Car.STL | 495.6KB | |
| R_X_Car_Beta.STEP | 225.7KB | |
| R_X_Car_Beta.STL | 505.7KB |
