Just some boxes shaped like the original 7 Tetris blocks. Lids included. These boxes can be useful for storing small items but can also be scaled up to be used as large organizers in a drawer.
The rail system is just a nice way to make sure the boxes are neatly aligned, and to also allow the boxes to slide with ease without getting scratched. I also just thought it'd be nice to have them slide neatly like in actual Tetris.
If you don't want to print the rails, the cylinder slides are still a useful way to stand the blocks up and prevent the undersides from being scratched.
Assembly:
Simply insert the small slide cylinders into the holes in the base of each block.
The rails are simply connected with the dovetail connectors.
It's simple, really.
I chose the original 7 colors but feel free to choose whatever colors you want lol no one's stopping you
| 20PACK_RU_D_Connector_0.2mm_PLA_MK3S_28m.gcode | 674.3KB | |
| 2PACK_Rail_Unit_Dovetail_1x1_0.2mm_PLA_MK3S_1h13m.gcode | 1.3MB | |
| 30PACK_Rail_Slide_Cylindrical_0.2mm_PLA_MK3S_1h35m.gcode | 6.7MB | |
| I_0.2mm_PLA_MK3S_5h32m.gcode | 4.3MB | |
| I_Container.stl | 40.9KB | |
| I_Lid.stl | 9.1KB | |
| J_0.2mm_PLA_MK3S_5h25m.gcode | 4.1MB | |
| J_Container.stl | 43.6KB | |
| J_Lid.stl | 9.5KB | |
| L_0.2mm_PLA_MK3S_5h26m.gcode | 4.1MB | |
| L_Container.stl | 43.6KB | |
| L_Lid.stl | 9.5KB | |
| O_0.2mm_PLA_MK3S_4h58m.gcode | 4.0MB | |
| O_Container.stl | 46.4KB | |
| O_Lid.stl | 8.5KB | |
| Rail_Slide_Cylindrical.stl | 104.7KB | |
| Rail_Unit_Dovetail_1x1.stl | 372.2KB | |
| Rail_Unit_Dovetail_2x2.stl | 1.4MB | |
| Rail_Unit_Dovetail_2x2_0.2mm_PLA_MK3S_2h1m.gcode | 1.9MB | |
| Rail_Unit_Dovetail_3x3.stl | 3.2MB | |
| Rail_Unit_Dovetail_3x3_0.2mm_PLA_MK3S_4h3m.gcode | 3.7MB | |
| Rail_Unit_Dovetail_4x4.stl | 5.6MB | |
| Rail_Unit_Dovetail_4x4_0.2mm_PLA_MK3S_6h48m.gcode | 6.1MB | |
| RU_D_Connector.stl | 1.1KB | |
| S_0.2mm_PLA_MK3S_5h25m.gcode | 4.2MB | |
| S_Container.stl | 44.0KB | |
| S_Lid.stl | 10.5KB | |
| T_0.2mm_PLA_MK3S_5h23m.gcode | 4.1MB | |
| T_Container.stl | 44.0KB | |
| T_Lid.stl | 9.8KB | |
| Z_0.2mm_PLA_MK3S_5h27m.gcode | 4.2MB | |
| Z_Container.stl | 44.0KB | |
| Z_Lid.stl | 10.5KB |
