TetraTruss 2 3D Printer Model
The file 'TetraTruss 2 3D Printer Model' is (stl,skp) file type, size is 1.2MB.
The file 'TetraTruss 2 3D Printer Model' is (stl,skp) file type, size is 1.2MB.
A simple TetraTruss. I'm including spoke measurements in millimeters, as there aren't that many. Using 3/16" dowels. If you are going to put one of these outside make sure to paint or poly the dowels! I use hot glue to cement the dowels in their holes.
Hubs
1-2 433.9
1-3 509.6
1-4 534,9
2-3 214.2
2-4 235.5
2-6 450.0
2-5 350.1
3-4 246.6
3-5 278.5
3-7 374.5
4-5 386.1
4-6 379.2
4-7 363.4
5-6 278.1
5-7 275.9
5-8 517.2
6-7 254.4
6-8 585.4
7-8 601.8
| 1.stl | 178.8KB | |
| 2.stl | 222.0KB | |
| 3.stl | 221.1KB | |
| 4.stl | 248.3KB | |
| 5.stl | 247.1KB | |
| 6.stl | 225.6KB | |
| 7.stl | 224.5KB | |
| 8.stl | 177.2KB | |
| TetraTruss2.skp | 3.0MB |
