Tesla Model 3 R/C Car 3D Printer Model
The file 'Tesla Model 3 R/C Car 3D Printer Model' is (stl) file type, size is 429.7KB.
The file 'Tesla Model 3 R/C Car 3D Printer Model' is (stl) file type, size is 429.7KB.
I made this to mount on a cheep rc car from walmart: https://www.walmart.com/ip/Adventure-Force-Night-Racer-Radio-Controlled-Vehicle-Blue/991259403?wmlspartner=wlpa&selectedSellerId=0&adid=22222222227241529330&wl0=&wl1=g&wl2=c&wl3=289715935615&wl4=pla-490343997306&wl5=9007284&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=991259403&wl13=&veh=sem&gclid=Cj0KCQjwjbveBRDVARIsAKxH7vmIrHeVVr0GbZdVsE2mR1zbft33zSILxClzairGWss7vKR63bvRWBIaAhSdEALw_wcB
For printing I recommend printing each half with the split down with supports on.
The one I printed needed some grinding in the front wheel well so I made that hole a bit bigger for you guys.
Best of luck, let me know how it turns out if you make one.
Make sure you paint it :)
| back_half.stl | 244.6KB | |
| front_half.stl | 277.3KB | |
| whole.stl | 475.9KB |
