Tesla Mobile Charger Holder 3D Printer Model
The file 'Tesla Mobile Charger Holder 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Tesla Mobile Charger Holder 3D Printer Model' is (stl) file type, size is 1.2MB.
This cable and handle holders were designed to fit the Tesla Mobile Charger that ships with Model 3.
I printed the holders on it's back and needed no supports.
The printer used was Prusa Mini, print settings default 0.25 DRAFT profile with infill set to 5% for the cable holder (the big part) and 30% for the handle holder (to make it stronger).
Both holders are fastened to the wall using a screw. I used 4.5x70mm screw for the big part (cable holder) and 4.5x50mm screw for the handle holder.
The Tesla logo covers the hole on the big part.
I used wall paint to paint the Tesla logo and letters so it "pops out" a little :)
I used prusament galaxy black
| TeslaMobileChargerHolder_-_CableHolder.stl | 1.6MB | |
| TeslaMobileChargerHolder_-_HandleHolder.stl | 1.6MB | |
| Tesla_logo_cover.stl | 24.3KB |
