iPhone 16 Pro Max compatible replacement Phone charger plate for TESLA Model 3 & Model Y featuring Apple’s MagSafe™ charger.
Two part prints. Single or double Apple MagSafe™ charger.
Step 1 (from the bottom) press from the bottom MagSafe™ charger into place (snug).
Step 2 (from the bottom) press in spacer disks with the space for the cable facing up towards the MagSafe™ charger bottom/s (snug).
Step 3 optional tape the rear of the bottom adapter to the rear of the charge plate. (I used packing tape). This isn’t entirely necessary as the pressure from Teslas original power cable lock keeps the prints from moving.
Step 4 (prepare to install in Tesla) remove the standard plate and the port locking cover.
Step 5 place the rectangular spacer at the bottom of the charger area (loose) this acts as a pressure point to keep the plate from moving.
Step 6 thread cables through the appropriate hole.
Step 7 place the (assembled) plate and the locking adapter spacer above the rectangular piece and slide on to the right the Tesla port cover.
Done!
| iPhone_16_Pro_Max_adapter_1_of_2.stl | 162.5KB | |
| iPhone_16_Pro_Max_adapter_2_of_2.stl | 140.7KB | |
| iPhone_16_Pro_Max_adapter_SINGLE_1_of_2.stl | 105.4KB | |
| iPhone_16_Pro_Max_adapter_SINGLE_2_of_2.stl | 110.3KB |
