Tesla Electric Vehicle Parking Sign 3D Printer Model
The file 'Tesla Electric Vehicle Parking Sign 3D Printer Model' is (STL) file type, size is 45.4KB.
The file 'Tesla Electric Vehicle Parking Sign 3D Printer Model' is (STL) file type, size is 45.4KB.
Here's a sign I made for a gift for someone, it's a Tesla parking sign designed to look similar to the signs you might find at a supercharger. It's 22.5cm x 16.2cm which is the same proportion as real signs, but shrunk down to fit nicely on my printer which is a Prusa i3 Mk3. The bolt holes are 3/16" so it can easily be just screwed to a wall or something. The whole thing is 1.9mm thick, with a 1.4mm white layer and a 0.5mm red layer. You should edit your GCode once you have sliced it to add a filament change command (M600 in Marlin) once you are done printing the lower 1.4mm layer. Then change your filament to red and finish off the top 0.5mm. If you're using 0.1mm layer height, you put this M600 command in after layer 14, if you are using 0.2mm layer height you would add it after layer 7.
| TeslaSign.STL | 232.5KB |
