Tented Redox’s Neodox Case (with Clean Usb Slots) 3D Printer Model
The file 'Tented Redox’s Neodox Case (with Clean Usb Slots) 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Tented Redox’s Neodox Case (with Clean Usb Slots) 3D Printer Model' is (stl) file type, size is 2.5MB.
This is a remix from the Neodox case for the Redox keyboard that you can find on github
Instead of a squared open slot on the back for the USB and a big hole for the jack it has precise, better looking slots designed to fit each side of the keyboard
One of the pro micro is soldered backwards so it's super important to print side right AND side left and not just mirror them, since the slots aren't at the same height
This version is tented, I made it different angles from 5 degrees to 45 degrees so you should find the one that suits you, even the more extremes.
I printed them with gyroid supports to have the botton of the plate printing flat but it shouldn't be necessary
| 20_degrees_left.stl | 1.5MB | |
| 20_degrees_right.stl | 1.9MB | |
| 35_degrees_left.stl | 1.5MB | |
| 35_degrees_right.stl | 1.9MB | |
| 40_degrees_left.stl | 1.5MB | |
| 40_degrees_right.stl | 1.9MB | |
| 45_degrees_left.stl | 1.4MB | |
| 45_degrees_right.stl | 1.8MB | |
| 5_degres_left.stl | 1.5MB | |
| 5_degres_right.stl | 1.9MB | |
| redox_neodox_10_degrees_right.stl | 1.9MB | |
| redox_neodox_10_degres_gauche.stl | 1.5MB | |
| redox_neodox_15_degrees_left.stl | 1.5MB | |
| redox_neodox_15_degrees_right.stl | 1.9MB | |
| redox_neodox_25_degrees_left.stl | 1.5MB | |
| redox_neodox_25_degrees_right.stl | 1.9MB | |
| redox_neodox_30_degreed_left.stl | 1.5MB | |
| redox_neodox_30_degrees_right.stl | 1.9MB |
