This is a tensegrity model with 2 identical pieces connected by 3 threads. Each piece is made of 2 parts, a base and a top bar. They are connected by pressing the 6mm x 6mm cube of the top bar into the 6mm x 6mm hole of the base. Mine pressed in firmly and held well without acetone or glue. I used ABS so that I can easily drill out the small pilot holes to just smaller than the #4 screws. The 3 threads connect to #4 x 1/2" screws.
| Tensegrity2.scad | 732.0B | |
| Tensegrity2.stl | 17.2KB | |
| Tensegrity2b.scad | 339.0B | |
| Tensegrity2b.stl | 6.3KB |
