This is a tensegrity model with 2 identical pieces connected by 5 threads or bead chains. Each piece is made of 2 parts, a base and an upright. They are connected with 2 - #4 x 1/2" screws. I used ABS so that I can easily drill out the small pilot holes to just smaller than the #4 screws. The 5 threads or bead chains also connect to #4 x 1/2" screws.
| Tensegrity1-Base.scad | 883.0B | |
| Tensegrity1-Base.stl | 31.8KB | |
| Tensegrity1-Upright.scad | 530.0B | |
| Tensegrity1-Upright.stl | 11.8KB |
