Ten Easter Eggshells 3D Printer Model
The file 'Ten Easter Eggshells 3D Printer Model' is (stl) file type, size is 174.7MB.
The file 'Ten Easter Eggshells 3D Printer Model' is (stl) file type, size is 174.7MB.
NOTE: These designs were originally posted on March 15, but were not accessible due to a Thingiverse glitch.
Stash your treats in these decorative Easter Eggshells! Contents are secured inside with a threaded insert on the bottom.
See here for video: https://youtu.be/bnmHGWe-gvg
See here for stable download: https://thangs.com/user/DaveMakesStuff/profile
The latticing and surfaces were designed using nTopology. Here’s a bit more information on each model:
Eggshell 1: Surface derived from the gyroid TPMS
Eggshell 2: Lattice derived from the Kelvin graph
Eggshell 3: Rotated Square Honeycomb
Eggshell 4: Surface derived from the SplitP TPMS
Eggshell 5: Surface derived from the gyroid TPMS (different orientation then Eggshell 1)
Eggshell 6: Lattice derived from a cluster of columns
Eggshell 7: Surface derived from the Schwarz diamond TPMS
Eggshell 8: Surface derived from the Fischer-Koch S TPMS
Eggshell 9: Hexagonal Honeycomb
Eggshell 10: Surface derived from the Schoen F-RD TPMS
| Eggshell_10_F-RD.stl | 72.9MB | |
| Eggshell_1_Gyroid.stl | 15.7MB | |
| Eggshell_2_Kelvin.stl | 16.6MB | |
| Eggshell_3_Rotated_Square.stl | 19.1MB | |
| Eggshell_4_SplitP.stl | 36.1MB | |
| Eggshell_5_Gyroid_Reoriented.stl | 16.1MB | |
| Eggshell_6_Columns.stl | 13.5MB | |
| Eggshell_7_Diamond.stl | 18.2MB | |
| Eggshell_8_Fischer_Koch_S.stl | 15.1MB | |
| Eggshell_9_Hexagonal.stl | 16.7MB | |
| Threaded_Insert.stl | 3.3MB |
