Template For More Shelf-carriers IKEA Billy (and Probably Other Models) 3D Printer Model
The file 'Template For More Shelf-carriers IKEA Billy (and Probably Other Models) 3D Printer Model' is (stl) file type, size is 16.1KB.
The file 'Template For More Shelf-carriers IKEA Billy (and Probably Other Models) 3D Printer Model' is (stl) file type, size is 16.1KB.
A simple template to add more holes for shelfs in your IKEA-Billy. Probably also useable for other IKEA-cases and cabinets. The (center to center) distance between the guiding pins and holes is 32 mm. The diameter of the pins is 5 mm.
There is an instant-drill-version and a mark-first-version.
If you want a shelf between predrilled holes, use the drill16
or mark16 version.
If you need other measurements, use the customizable version of this thing: https://www.thingiverse.com/thing:3541489
Happy templating :)
| Peg_distancetemplate_Billy_Drill.stl | 62.2KB | |
| Peg_distancetemplate_Billy_Mark.stl | 61.9KB | |
| Peg_disttemplate_Billy_Drill16.stl | 46.5KB | |
| Peg_disttemplate_Billy_Mark16.stl | 46.6KB |
