Telescope Phone Mount (for Crayford Focuser – Skyawtcher, Celestron,..) 3D Printer Model
The file 'Telescope Phone Mount (for Crayford Focuser – Skyawtcher, Celestron,..) 3D Printer Model' is (stl) file type, size is 3.5MB.
The file 'Telescope Phone Mount (for Crayford Focuser – Skyawtcher, Celestron,..) 3D Printer Model' is (stl) file type, size is 3.5MB.
I made a remix of the mount to fit my Skywatcher 150/750 but it should fit on any telescope that has the same focuser (or the same 2 to 1.25 inch adapter) since it clamps around that part. There is also a reducer that can be used to clamp the mount to a 2x barlow (but it probably doesnt fit on all barlows - I have a T2 2x bralow)
The mount uses mostly M3 screws (threads are modeled but I still needed to tap them):
-14x M3x20mm (for clamps and to screw frame_A to frame_B)
-1x M4x50mm (to tighten frame_C to the telescope)
You can use the mount with 6,3mm to 26mm eyepieces (might work with shorter and longer EP but I only have 6,3mm 10mm and 26mm)
I also added 3 thumbscrew parts, but I can not guarantee they will fit on any screw type.
| barlow_clamp.stl | 130.2KB | |
| bottom_clamp.stl | 1.6MB | |
| frame_A.stl | 152.4KB | |
| frame_A_side.stl | 1.1MB | |
| frame_B.stl | 97.5KB | |
| frame_B_side.stl | 58.4KB | |
| frame_C.stl | 3.4MB | |
| side_clamp.stl | 1.6MB | |
| thumbscrew_M4.stl | 230.9KB | |
| thumb_screw_big_M3.stl | 566.1KB | |
| thumb_screw_small_M3.stl | 412.6KB |
