The file 'Tektronix 222 / 224 Lithium Battery Case 3D Printer Model' is (stl,pdf,3dm,stp) file type, size is 470.1KB.
This is an enclosure for the lithium battery replacement for the Tektronix 222 and 224 mini oscilloscope as designed by kitsune-denshi.
http://kitsune-denshi.net/projects:tek222bat
The pdf file is the front label. print it out at 100% size so it fits.
I printed it on paper sticker sheet in my laser printer and laminated it with clear packing tape.
You'll need to add 4x M2.4x10mm screws or an equivalent size to screw the lid on.
I used countersunk screws (and used a countersinking bit to drill the plastic out) for a flush finish, but there is space once the side panel on the scope is installed for normal pan head screws.
You'll also need some 3mm diameter clear acrylic rod to act as light pipes for the LED's.
I put some heat shrink on them to prevent light bleed.
Finally, some foam on the lid will keep it nice and snug once the side panel is reinstalled.
I've supplied STEP and Rhino 3D (.3dm) files so you can remix and stuff if needed. Just be cool and credit me somehow. :)
| Case.stl | 226.7KB | |
| Label.pdf | 70.8KB | |
| Lid.stl | 327.3KB | |
| Tek_224_Battery_Box.3dm | 977.4KB | |
| Tek_224_Battery_Box.stp | 360.1KB |
