Two options for main part. I recommend print that middle part in one piece! (main_one.stl)
Or For middle part in two pieces print main1.stl and main2.stl (not recommended but it works :) )
| 01.STL | 33.6KB | |
| 010.STL | 114.9KB | |
| 011.STL | 19.8KB | |
| 012.STL | 28.2KB | |
| 02.STL | 41.7KB | |
| 03.STL | 67.7KB | |
| 04.STL | 15.1KB | |
| 05.STL | 29.8KB | |
| 06.STL | 34.8KB | |
| 07.STL | 70.2KB | |
| 08.STL | 61.0KB | |
| 09.STL | 52.4KB | |
| Assem1.SLDASM | 912.1KB | |
| hour.STL | 54.2KB | |
| main1.STL | 305.8KB | |
| main2.STL | 90.0KB | |
| main_one.STL | 309.3KB | |
| min.STL | 43.2KB | |
| sec.STL | 46.2KB |
