TD-4 Star Wars Visions Ep 8 1:12 Black Series Figure. Updated 3D Printer Model
The file 'TD-4 Star Wars Visions Ep 8 1:12 Black Series Figure. Updated 3D Printer Model' is (stl,chitubox) file type, size is 22.0MB.
The file 'TD-4 Star Wars Visions Ep 8 1:12 Black Series Figure. Updated 3D Printer Model' is (stl,chitubox) file type, size is 22.0MB.
TD-4 was a droid that was the constant companion of Lop on the planet Tao. The droid possessed a number of abilities and tools that included a recording functionality, capturing moments of Lop's life, from her time as an orphan through until becoming part of a family.
Intended for Resin 3d printing. Print one socket for each head and glue into head. The socket should sit flush inside the head it might need drilled or cleaned up inside the head hole encase it fills with some excess resin.
Ball might need to be thickened with super glue to make socket tighter if too loose.
Feel free to use/modify/sell prints along as you credit me and Bozzy1979 and link back to here.
Just don't sell the file.
| body.stl | 4.8MB | |
| body_arms.stl | 6.2MB | |
| flight_body.stl | 2.6MB | |
| flight_body_arms.stl | 3.1MB | |
| flight_head.stl | 4.6MB | |
| flight_head_eyelid.stl | 4.5MB | |
| Head.stl | 4.4MB | |
| Head_eyelid.stl | 4.3MB | |
| Neck_socket_Print_one_for_each_head.stl | 170.9KB | |
| Presupported.chitubox | 44.7MB |
