The file was remixed from one I found that was too large at 200x200x200. So I set out to create single and double boxes sized for my needs. Namely storing my printer replacement parts. The first two boxes (single and double drawer box 1 and 1A) I resized at to use the drawer that is 50H x 100W x 100D and is labeled drawer1,1a. The second box was a single drawer (box2) that is 100x100x100 and uses drawer2. Third was a double drawer box (box2a) which is 100H x 100W x 200D and uses drawer2A. The forth was a single drawer box (box3) which is 100H x 100W x 200D and uses drawer 3. The drawers with a 200D do not go all the way to the back of the box. They fall a bit short due to limitations of my printer bed.

Hopefully you can see which boxes and drawers go together. There are mounting holes to the wall on the back of the boxes. I didn't use that feature of them so I won't stipulate as to how well they work. The original file had connectors that would supposedly lock the boxes together. I found that the reduced size those connectors didn't work so you can glue them together or stack them loosely.

I recommend that you print these files with the back side down (boxes) and the drawer bottom down. The drawers print best with normal support.