TBS Tracer Immortal-T Antenna Arm Mount 3D Printer Model

Author: @
License: CC BY
File formats: STL
Download type: zip
Size:1.5MB

The file 'TBS Tracer Immortal-T Antenna Arm Mount 3D Printer Model' is (STL) file type, size is 1.5MB.

Summary

A simple but effective TBS Tracer Immortal-T mounting solution - this requires only 1 cable-tie and keeps it in place.

I haven't test-fitted all arm widths yet, so feedback is much appreciated!
The antenna is a tight fit, the cable-tie will clamp it down nicely. The flat side of the antenna should be oriented to the carbon for the best fit.

Make sure to pick the one matching to your arm width.
If the size you're looking for is missing, please let me know!

Based on the original Crossfire Immortal-T mount from add1ct3dd:
Crossfire Immortal-T mount

Tracer_Immortal_T_Mount_10mm.STL 474.6KB
Tracer_Immortal_T_Mount_12.5mm.STL 472.0KB
Tracer_Immortal_T_Mount_15mm.STL 470.1KB
Tracer_Immortal_T_Mount_17mm.STL 460.7KB
Tracer_Immortal_T_Mount_6mm.STL 293.3KB
Tracer_Immortal_T_Mount_8.5mm.STL 482.0KB
Tracer_Immortal_T_Mount_9.5mm.STL 475.6KB
Tracer_Immortal_T_Mount_9mm.STL 479.6KB