TBA 3D Printer Model
The file 'TBA 3D Printer Model' is (stl) file type, size is 10.1MB.
The file 'TBA 3D Printer Model' is (stl) file type, size is 10.1MB.
PLA
0.2mm Layer
3 Walls
5% Infill * Strap Slide, Catch Hinge Pins, Strap Mounts 100% Infill
No Supports
Brim required for Battery Retainer
Previous Problems / suggestions :
Case Opens the wrong way
Catch snapped off due to layers
Battery Tab snapped off due to layers
TPU not usually held
Weak Hinge
Too Heavy
Improvements:
Case now opens away from the shoulder strap
Shoulder Strap Mount now retractable
Catch is now stronger and easier to release.
Battery alignment tabs stronger
TPU not required, battery holder secures the Neo
Hinge now flush and stronger
Infill reduced to 5%
Walls now 3
Add a pause layer 40 and insert the PETG cut out support, if not add supports to base.
Battery Retainer requires a 10mm Brim (requires deburring)
Catch may require deburring and possibly gluing when fitting to the top
Amazon have a suitable shoulder strap for £3
The Neo Drone offset and can be selected and coloured with a suitable printer
| Catch_Hinge_Pins.stl | 1.1MB | |
| Cut_Out_Support_PETG__Insert_Layer_40.stl | 3.8KB | |
| Neo_Base.stl | 2.9MB | |
| Neo_Case_Top.stl | 68.1MB | |
| Neo__Battery_Retainer_Brim_Required.stl | 664.9KB | |
| Slide_Mounts.stl | 16.4MB | |
| Strap_Slide.stl | 2.2MB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
