TAZ5 Dual Extruder V2 Filament Guide Bracket 3D Printer Model
The file 'TAZ5 Dual Extruder V2 Filament Guide Bracket 3D Printer Model' is (step,stl) file type, size is 53.5KB.
The file 'TAZ5 Dual Extruder V2 Filament Guide Bracket 3D Printer Model' is (step,stl) file type, size is 53.5KB.
Remixed from a tutorial posted by KelVarnson on the Lulzbot forum page, this modified bracket keeps filament straight as it enters the extruder. I was having all sorts of issues with the Taz5 jamming especially when printing PLA. I started to realize that as the extruder gets to a certain height the filament becomes bent as the extruder tries to grab it.
I modified the bracket given in the tutorial here: https://forum.lulzbot.com/viewtopic.php?f=36&t=3319, essentially making the mounting nut slot a little longer, cutting the profile down so that you can get your fingers underneath still. As well the filament thru holes and teflon tube holes were a little tight and I needed to clean them up with a drill, these allow it to just fit.
| TAZ5_MODIFIED_FILAMENT_GUIDE.step | 76.0KB | |
| TAZ5_MODIFIED_FILAMENT_GUIDE.stl | 152.5KB |
