Tatra 8×8 Profa Cracking Fix 3D Printer Model Free Download

3D Printer Models

Tatra 8×8 Profa Cracking Fix 3D Printer Model

Author: @xXXMorpheusXXx

License: CC BY-SA

File formats: stl

Download type: zip

Size:9.6KB

The file 'Tatra 8×8 Profa Cracking Fix 3D Printer Model' is (stl) file type, size is 9.6KB.

Description Files (1)

Summary

An easy fix for the constant cracking noise of the Lego MOC Tatra 8x8 Profa by Madoca1977. Print four times and place behind each pair of the tan 14 tooth gears in the drive train. The model is now capable of climbing an angle of 45 degrees, without any cracking or slipping. Enjoy!

Note:

When the model is already fully assembled you need to build back everything to reach the
required part of the drive train.
This mod was only tested with a setup that uses the slightly more powerful Mould King L
motors, therefore the original setup might not be able to provide the required power for a 45
degree climb.

Tatra_8x8_Profa_Gearbackplate.stl

48.3KB