Target Master Nightstick For WFC Cyclonus 3D Printer Model
The file 'Target Master Nightstick For WFC Cyclonus 3D Printer Model' is (stl) file type, size is 730.6KB.
The file 'Target Master Nightstick For WFC Cyclonus 3D Printer Model' is (stl) file type, size is 730.6KB.
Nightstick is based off the G1 Rebirth episodes from season 4 and is designed to be used with the WFC Kingdom Cyclonus. He is fully articulated and blast effect compatible.
He is designed to use 1.75 filament as pins.
Mirror legs and arms. Fit may be snug and require sanding. Loose ball joints can be tightened using floor polish as you would a typical figure. Joints should be tight upon first print but may loosen.
All parts can be printed 20% infill but 100% is recommended.
Rafts may need to be used if you dont trust or want to deal with a brim
| nightstick_arm_lower.stl | 185.4KB | |
| nightstick_arm_upper.stl | 155.0KB | |
| nightstick_body.stl | 346.0KB | |
| nightstick_crotch.stl | 349.6KB | |
| nightstick_foot.stl | 43.4KB | |
| nightstick_gun_lower.stl | 84.7KB | |
| nightstick_gun_upper.stl | 135.6KB | |
| nightstick_hand.stl | 177.0KB | |
| nightstick_head.stl | 356.7KB | |
| nightstick_leg_lower.stl | 208.8KB | |
| nightstick_leg_upper.stl | 189.7KB | |
| nightstick_swivel.stl | 59.1KB |
