Tardis Siege Mode 3D Printer Model
The file 'Tardis Siege Mode 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Tardis Siege Mode 3D Printer Model' is (stl) file type, size is 2.2MB.
I found a Siege mode Tardis while looking to print the regular one. It looked pretty cool but the details were low and the geometry was dense, messy and hard to modify into something I was comfortable printing.
So I made one with cleaner geometry from scratch using a paper printout 2d version I found as a template: http://papermau.blogspot.com/2015/01/doctor-who-siege-mode-tardis-paper.html
To get the the finer details to print, you need a minimum 0.4mm nozzle setting with 0.2mm layer height (I printed at 0.15mm). Make sure to check the details during print preview and if you scale down then you'll need to increase the print resolution with a finer nozzle and/or layer heights.
You only need supports for the notched out edges (I didn't bother with any on the sides and they came out ok) but at scaled up size, the vertical details might need supports.
| tardis_seige.stl | 4.9MB |
