Added a "metal grate floor" that glues in to the bottom slots on the walls.
Cut the back to 2 pieces. The bottom attaches to the 3 walls and base. The top is glued to "Tardis_ring_x175.stl" so that the top slides on to attach.
Took a few layers off the top and bottom of "Tardis_Windows.stl" hollowed it out and printed it in clear PLA. Give a nice frosted look to the windows.
Tardis_Windows thin hollow thinner.stl
Also added labels, print "Police box.jpg" at 4.25" x 0.5" and
"TARDIS door.jpg" at 1.33" x 1.1" so they fit in the model.
The size was perfect to hold the coasters from
https://www.thingiverse.com/thing:4664280
I glued cork to the bottom of the coasters and the TARDIS holds 11 coasters that can be removed without taking the top off, or 12 if you pick up the top.
Got a battery operated 10 LED light set at Dollar Tree. Cut off the last 3, only used 7.
Glued the battery pack in with E6000. Attached the lights with a hot glue gun. for the top light I drilled a 3/16" hole in the bottom of "TARDIS_lamp_x175.stl" and it holds the LED tight.
| Tardis_inside_floor.stl | 1.3MB | |
| TARDIS_Side_bottom.stl | 5.1MB | |
| TARDIS_Side_top.stl | 4.6MB | |
| Tardis_Windows_thin_hollow_thinner.stl | 996.4KB |
