Tardis Knob (whole/half) 3D Printer Model
The file 'Tardis Knob (whole/half) 3D Printer Model' is (stl) file type, size is 59.8KB.
The file 'Tardis Knob (whole/half) 3D Printer Model' is (stl) file type, size is 59.8KB.
This is a remix of a very cool tardis bottle opener.
I really liked the cleanness of the layout. I shrank it to 75% and added a stem with a 3.4mm hole. It should accommodate a standard drywall screw, or pretty much any junk drawer fastener.
Two versions are provided. One is a full 360 degree tardis, the other is sliced in half vertically to have a thinner profile.
The bottle opener does not need supports, but this design will.
Note: if you downloaded this right after it was published, I recommend redownloading the whole knob file. The stems was not set at the same height as the half. Now they're both the same. Sorry about that!
Edit 2/8/2019: Double Apologies
I printed both versions of this and found out two things.
1: The stem is not attached to the half knob! The corrected STL is now posted.
2: Use supports touching the bed only. Don't support all. You get weird supports for the tardis part that are completely nonfunctional.
| Tardis_Knob_-_Half.stl | 93.2KB | |
| Tardis_Knob_-_Whole.stl | 151.7KB |
