Tardis (1963) 3D Printer Model
The file 'Tardis (1963) 3D Printer Model' is (blend1,stl,blend) file type, size is 1.2MB.
The file 'Tardis (1963) 3D Printer Model' is (blend1,stl,blend) file type, size is 1.2MB.
My take on 1963 Tardis taken from blue prints
for 00 Gauge print at 18%
Lay doors flat faceup for printing
Separate top and Bottom half's for ease of printing
allowing door fitting to be tweaked before gluing.
Also ensures you align the doors to the top
the original Tardis Doors only opened inwards
these doors have been designed for both ways just for convenience,
the blend files are supplied if you wish to cut the top away at door height
to ease fitting the doors.
the doors may also need sanding a little to make them operate
they should open in and out
have fun
| tardis_5_Left_door_.blend1 | 942.2KB | |
| tardis_5_Left_door_.stl | 51.1KB | |
| tardis_5_Right_door_.blend | 942.0KB | |
| tardis_5_Right_door_.stl | 51.1KB | |
| tardis_5__.blend | 1.7MB | |
| tardis_5__.stl | 478.3KB | |
| tardis_Bottom_Half_.blend | 1.5MB | |
| tardis_Bottom_Half_.stl | 414.7KB | |
| tardis_Top_Half_.blend | 1.0MB | |
| tardis_Top_Half_.stl | 150.7KB |
![SciFi Spaceship Kitbash [Updated] 3D Printer Model](https://cdn.3axis.co/assets/57/e4/36/83/57e43683-3711-41dd-a400-32ad1161a498/images/20f4f912-a775-4c13-a643-f7c3d573bb43_thumb.jpg)
