This is my creation to remove those dreaded eccentric nuts from the Tarantula Y carriage.
This will bolt up to the stock acrylic bed frame or aftermarket aluminum version.
The holes are aligned in the center of each frame hole and so no filler needed for the eccentric holes.
There is no need for the nylon spacers or the ungodly amount of washers used for spacing purposes.
Parts list:
4: 40mm-45mm x 5mm bolts (only use low profile headed bolts for clearance reasons)
4: 24mm x 5mm bolts
8: 5mm nuts
4: 25mm-35mm x 4mm bolts
4: 4mm nuts
This is going to be a work in progress for the time being, so if there are any questions or concerns please contact me and lets improve this together.
EDIT: 12/24/2019
Sorry for the long wait time for a update, got inspired to redesign parts again so i have uploaded the new variations of parts. pics might be outdated since its been a while of testing for the newer part that works alright for my printer.
please let me know in the comments for adjustments i can make to the model to make it better.
| Bracket.stl | 263.7KB | |
| foot.stl | 112.8KB | |
| Slide.stl | 132.1KB | |
| slide_foor.stl | 113.4KB |
