If you're like most, you usually have a roll of tape near your 3D printer. You probably also have a collection of assorted tools nearby. Keep everything nice and tidy with this tape roll caddy.
Designed to fit inside a 2" roll of tape, >75 mm inside diameter. I've included three versions, each with a different number of holes, noted on the file name(the print shown is 7x-wLip). The files wLip have a small edge on the bottom that will hold the tape roll onto the caddy, keeps everything in one piece, nice and neat. But if you have larger tools in the caddy you may have to remove them to take the tape out, so I've included lip-less versions too. If you re-tape your print bed rarely, like me, the lipped version is for you. if you're still working through some calibration issues and are replacing more frequently, try the lip-less.
| 5x-wLip.skp |
| 5x-wLip.stl |
| 5x.skp |
| 5x.stl |
| 7x-wLip.skp |
| 7x-wLip.stl |
| 7x.skp |
| 7x.stl |
| 9x-wLip.skp |
| 9x-wLip.stl |
| 9x.skp |
| 9x.stl |
