Printable snap-together tank with electronics. This design is a collaboration between my company http://newbound.com and NBitWonder.
First off, the list of things this is a derivative of:
My original tank design http://www.thingiverse.com/thing:6554
Tracks Chain and Pinions by foxdewayne http://www.thingiverse.com/thing:5690
Chain and Pinions by aubenc http://www.thingiverse.com/thing:5656
Large Threaded Bolt and Nut by ub3rgeek http://www.thingiverse.com/thing:4880
Parameterized battery pack with contacts by obijuan http://www.thingiverse.com/thing:5079
Parameterized Battery Compartment by guru http://www.thingiverse.com/thing:5051
The circuit board may have been updated since the version on thingiverse http://www.thingiverse.com/thing:7618. Download the latest version from github https://github.com/NBitWonder/DCMotorController.
The parts are individually laid out in layer 2 of tank.blend. The tank.stl is really just for the pretty render and is not useful for printing.
UPDATE: The motors I chose for this project ended up not having enough torque to drive the treads. The motors ended up getting used for the successor to the Tank line-- the Truckbot line: http://www.thingiverse.com/thing:10349
| axel-end.stl | 179.9KB | |
| axel-gear.stl | 254.8KB | |
| axel-spacer.stl | 70.9KB | |
| axel.stl | 3.0KB | |
| axelholder.stl | 170.8KB | |
| battery.stl | 602.8KB | |
| elbow.stl | 25.7KB | |
| motorholder.scad | 512.0B | |
| motorholder.stl | 59.2KB | |
| pcb-holder-mirror.stl | 276.1KB | |
| pcb-holder.stl | 274.0KB | |
| plus.stl | 78.0KB | |
| short-axel.stl | 3.0KB | |
| tank-tread-1-single.stl | 134.5KB | |
| tank-tread-2-single.stl | 44.3KB | |
| tank.blend | 7.6MB | |
| tank.stl | 3.4MB | |
| wheel.stl | 507.1KB | |
| worm-end.stl | 159.4KB | |
| worm-gear.stl | 2.6MB | |
| wormholder-mirror.stl | 482.6KB | |
| wormholder.stl | 482.3KB |
