Tank Chemistry 3D Printer Model
The file 'Tank Chemistry 3D Printer Model' is (stl) file type, size is 237.7KB.
The file 'Tank Chemistry 3D Printer Model' is (stl) file type, size is 237.7KB.
Tank in dimensions 1:1. Threads should be made after printing.
| 015.000.010.002.00_kolnierzDN50PN2.5Typ01.stl | 67.9KB | |
| 015.001.006.001.00_walczak_DN300.stl | 25.7KB | |
| 015.001.006.002.00_kolnierz_DN300_Typ01EN.stl | 111.2KB | |
| 015.001.006.003.00_dennica_DN300.stl | 135.8KB | |
| 015.001.006.004.00_krociec_DN25x50GW3-4.stl | 27.4KB | |
| 015.001.006.006.00_kolnierzASMEB16.stl | 59.8KB | |
| 015.001.006.007.00_krociecDN15x50GW3-8.stl | 24.1KB | |
| 015.001.006.008.00_rura.stl | 19.6KB | |
| 015.001.006.009.00_krociec_czujnika_temp.stl | 21.4KB | |
| 015.001.006.010.00_korek_T8.stl | 26.7KB | |
| 015.001.006.013.00_wzmocnienie_zawiesia.stl | 5.0KB | |
| 015.001.006.014.00_podstawa_zawiesia.stl | 12.8KB | |
| 015.001.006.015.00_wspornik_zawiesia.stl | 684.0B | |
| 015.001.010.001.00_kolnierz_DN300_PN6_Typ_01_wg_EN.stl | 111.2KB | |
| 015.001.010.003.00_krociec_DN50x100.stl | 39.9KB | |
| 015.001.010.004.00_Dennica_DN300.stl | 125.3KB | |
| 015.001.010.005.00_krociec_DN25x50.stl | 31.6KB | |
| 015.001.011.001.00_podkladka_ISO_7092_ST_20_-_140_HV.stl | 21.0KB | |
| 015.001.011.002.00_nakretka_ISO_4032_M20.stl | 41.5KB | |
| 015.001.011.003.00_sruba_SS_ISO_4017_M20_x_50.stl | 27.9KB | |
| 015.001.011.004.00_uszczelka.stl | 56.9KB |
