To make this brooch, you can either print out the jewels and the base separately, or print them all out in one piece ("One Piece Pin C). If printing out separately, see picture above for what jewels go where.
Also needed:
-super glue
-pin back of your choice
| Jewel_A.STL | 12.2KB | |
| Jewel_B.STL | 1.6KB | |
| Jewel_C.STL | 12.0KB | |
| Jewel_D.STL | 2.2KB | |
| Jewel_E.STL | 20.3KB | |
| Jewel_F.STL | 18.1KB | |
| Jewel_G.STL | 18.1KB | |
| One_Piece_Pin_C.STL | 181.4KB | |
| tank_pin_B.STL | 81.1KB |
