The file 'Tank – 1:24 Scale WW1 British Landship 3D Printer Model' is (stl) file type, size is 130.0MB.
When printed on FDM printer, model may take an estimated 6-and-a-half days to print at a 0.15mm layer height with 5% infill. Model may take up to 1kg of filament.
Modified from Google's 3D warehouse model.
Parts come together with glue. Inserts have been added to aid with aligning the pieces perfectly.
The displayed example was printed using the default 0.15mm layer height quality setting on Prusa Slicer. Infill was 5% and a gyroid pattern. The inserts were printed at 0.3mm layer thickness to reduce time since those parts were not aesthetic-critical components.
Inserts come in two varieties: 0.2mm offset tolerance and 0.3mm. If your printer is not fine-tuned for high-tolerance prints, it is recommended to use 0.3mm offset inserts. 0.2mm offset tolerance inserts fit perfectly into the holes for displayed model.
When slicing, you don't need to use supports! Just print as-is.
Length: ~14.5in or ~36.8cm
Width: ~8.5in or ~21.6cm
Height: ~4.5in or ~11.4cm
| 2mm_offset_front_extension_insert_x3.stl | 1.1KB | |
| 2mm_offset_front_main_insert_0_x1.stl | 1.1KB | |
| 2mm_offset_front_main_insert_1_x2.stl | 1.1KB | |
| 2mm_offset_left_rail_insert_x2.stl | 49.9KB | |
| 2mm_offset_left_section_insert_0_x3.stl | 1.4KB | |
| 2mm_offset_left_section_insert_1_x8.stl | 1.1KB | |
| 2mm_offset_left_section_insert_2_x2.stl | 1.4KB | |
| 2mm_offset_left_section_turret_segment_insert_0_x1.stl | 1.1KB | |
| 2mm_offset_left_section_turret_segment_insert_1_x1.stl | 734.0B | |
| 2mm_offset_left_section_turret_segment_insert_2_x2.stl | 26.4KB | |
| 2mm_offset_left_section_turret_segment_insert_3_x1.stl | 49.9KB | |
| 2mm_offset_left_section_turret_segment_insert_4_x1.stl | 1.4KB | |
| 2mm_offset_middle_external_piece_insert_x2.stl | 1.1KB | |
| 2mm_offset_middle_main_insert_0_x2.stl | 1.4KB | |
| 2mm_offset_middle_main_insert_1_x2.stl | 1.4KB | |
| 2mm_offset_middle_main_insert_2_x2.stl | 1.1KB | |
| 2mm_offset_middle_main_insert_3_x2.stl | 1.4KB | |
| 2mm_offset_midsection_insert_x6.stl | 1.1KB | |
| 2mm_offset_rear_main_insert_x4.stl | 1.1KB | |
| 2mm_offset_right_rail_insert_x2.stl | 49.9KB | |
| 2mm_offset_right_section_insert_0_x3.stl | 1.4KB | |
| 2mm_offset_right_section_insert_1_x8.stl | 1.1KB | |
| 2mm_offset_right_section_insert_2_x2.stl | 1.4KB | |
| 2mm_offset_right_section_turret_segment_insert_0_x1.stl | 1.1KB | |
| 2mm_offset_right_section_turret_segment_insert_1_x1.stl | 734.0B | |
| 2mm_offset_right_section_turret_segment_insert_2_x2.stl | 26.4KB | |
| 2mm_offset_right_section_turret_segment_insert_3_x1.stl | 49.9KB | |
| 2mm_offset_right_section_turret_segment_insert_4_x1.stl | 1.4KB | |
| 3mm_offset_front_extension_insert_x3.stl | 1.1KB | |
| 3mm_offset_front_main_insert_0_x1.stl | 1.1KB | |
| 3mm_offset_front_main_insert_1_x2.stl | 1.1KB | |
| 3mm_offset_left_rail_insert_x2.stl | 49.9KB | |
| 3mm_offset_left_section_insert_0_x3.stl | 1.4KB | |
| 3mm_offset_left_section_insert_1_x8.stl | 1.1KB | |
| 3mm_offset_left_section_insert_2_x2.stl | 1.4KB | |
| 3mm_offset_left_section_turret_segment_insert_0_x1.stl | 1.1KB | |
| 3mm_offset_left_section_turret_segment_insert_1_x1.stl | 1.1KB | |
| 3mm_offset_left_section_turret_segment_insert_4_x1.stl | 1.4KB | |
| 3mm_offset_middle_external_piece_insert_x2.stl | 1.1KB | |
| 3mm_offset_middle_main_insert_0_x2.stl | 1.4KB | |
| 3mm_offset_middle_main_insert_1_x2.stl | 1.4KB | |
| 3mm_offset_middle_main_insert_2_x2.stl | 1.1KB | |
| 3mm_offset_middle_main_insert_3_x2.stl | 1.4KB | |
| 3mm_offset_midsection_insert_x6.stl | 1.1KB | |
| 3mm_offset_rear_main_insert_x4.stl | 1.1KB | |
| 3mm_offset_right_rail_insert_x2.stl | 49.9KB | |
| 3mm_offset_right_section_insert_0_x3.stl | 1.4KB | |
| 3mm_offset_right_section_insert_1_x8.stl | 1.1KB | |
| 3mm_offset_right_section_insert_2_x2.stl | 1.4KB | |
| 3mm_offset_right_section_turret_segment_insert_0_x1.stl | 1.1KB | |
| 3mm_offset_right_section_turret_segment_insert_1_x1.stl | 1.1KB | |
| 3mm_offset_right_section_turret_segment_insert_4_x1.stl | 1.4KB | |
| front_extension_0.stl | 4.4MB | |
| front_extension_1.stl | 3.8MB | |
| front_extension_2.stl | 3.8MB | |
| front_extension_3.stl | 5.0MB | |
| front_extension_cover.stl | 5.4KB | |
| front_main.stl | 21.8MB | |
| left_rail_0.stl | 62.6KB | |
| left_rail_1.stl | 58.8KB | |
| left_rail_2.stl | 10.9KB | |
| left_section_treads_0_0.stl | 13.2MB | |
| left_section_treads_0_1.stl | 7.4MB | |
| left_section_treads_0_2.stl | 8.1MB | |
| left_section_treads_1_0.stl | 20.2MB | |
| left_section_treads_1_1.stl | 17.5MB | |
| left_section_treads_1_2.stl | 14.8MB | |
| left_section_turret_segment_0.stl | 9.1MB | |
| left_section_turret_segment_1.stl | 5.5MB | |
| left_section_turret_segment_2.stl | 10.2MB | |
| left_section_turret_segment_3.stl | 137.6KB | |
| left_section_turret_segment_4.stl | 109.8KB | |
| left_section_turret_segment_5.stl | 43.6KB | |
| middle_external_piece_0.stl | 8.7MB | |
| middle_external_piece_1.stl | 3.2MB | |
| middle_external_piece_2.stl | 6.1MB | |
| middle_main_0.stl | 9.2MB | |
| middle_main_1.stl | 34.1MB | |
| middle_main_cover_0.stl | 5.4KB | |
| middle_main_cover_1.stl | 5.4KB | |
| rear_main.stl | 48.7MB | |
| right_rail_0.stl | 68.8KB | |
| right_rail_1.stl | 76.7KB | |
| right_rail_2.stl | 16.0KB | |
| right_section_treads_0_0.stl | 13.2MB | |
| right_section_treads_0_1.stl | 7.4MB | |
| right_section_treads_0_2.stl | 8.1MB | |
| right_section_treads_1_0.stl | 20.2MB | |
| right_section_treads_1_1.stl | 17.5MB | |
| right_section_treads_1_2.stl | 14.8MB | |
| right_section_turret_segment_0.stl | 4.8MB | |
| right_section_turret_segment_1.stl | 5.5MB | |
| right_section_turret_segment_2.stl | 10.2MB | |
| right_section_turret_segment_3.stl | 137.6KB | |
| right_section_turret_segment_4.stl | 109.8KB | |
| right_section_turret_segment_5.stl | 43.6KB |
