TANGO Starfleet Drydock 3D 3D Printer Model
The file 'TANGO Starfleet Drydock 3D 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'TANGO Starfleet Drydock 3D 3D Printer Model' is (stl) file type, size is 3.0MB.
Hi
This is a personal proyect to exhibit some of my Eaglemoss Startrek ships
Its inspired on Spacedocks or drydocks seen in series o movies about Star trek along the years.
I´ve provided with leds for visual improvement of the model.
it´s simple to print with or without suport.
Feel free to make it and share.
Sorry for my spanglish,
LLAP.
Link to original Dock prototype video, is bigger with front deck, is nice but hide part of the model. https://youtu.be/Eoe7icl5l-s
Update video https://youtu.be/3P2u4cHYAd4
A few bucks are welcome , i need buy PLA glow int the dark an is very expensive in our quadrant.
Q´APLA
Last minute : the v2 versión is for minor detalis and adjustement.
| Costillas.stl | 1.1MB | |
| Costilla_Frontal.stl | 694.2KB | |
| Frente_Simplificado.stl | 21.2KB | |
| Gondolas.stl | 28.4KB | |
| Gondolas_Frame.stl | 1.4MB | |
| Gondolas_v2.stl | 28.1KB | |
| Gondolas_ventanas.stl | 684.0B | |
| Motores_conector_v2.stl | 20.4KB | |
| Motores_cuerpo.stl | 40.6KB | |
| Motores_tapa.stl | 25.0KB | |
| Motores_ventana_v2.stl | 684.0B | |
| Reflectores_altos_angulo_25.stl | 23.0KB | |
| reflectores_altos_rectos_v2.stl | 20.8KB | |
| Reflectores_bajos__planos.stl | 84.3KB | |
| Reflectores_laterales.stl | 684.0B | |
| Reflector_frontal.stl | 6.9KB | |
| SFF_Tango_Starfleet_Drydock.stl | 5.0MB | |
| Soporte_cuerda.stl | 8.5KB | |
| Soporte_curvo.stl | 12.2KB | |
| Soporte_doble.stl | 147.6KB | |
| Soporte_simple.stl | 135.6KB | |
| Soporte_topes.stl | 60.2KB |
