TAMIYA CC02 FC Mount 3D Printer Model
The file 'TAMIYA CC02 FC Mount 3D Printer Model' is (stl) file type, size is 79.3KB.
The file 'TAMIYA CC02 FC Mount 3D Printer Model' is (stl) file type, size is 79.3KB.
(CC02) TAMIYA LAND CRUISER 40 FC Mount
The FC Mount is designed to install a flight controller (FC) on the TAMIYA LAND CRUISER 40 with a CC02 chassis, enabling its use as an Ardupilot Rover.
This mount consists of an FC plate designed to position the flight controller at the center of the vehicle, a Device Plate for attaching additional devices such as GPS, and Stand parts used for assembly.
While it has been tested with the TAMIYA LAND CRUISER 40, modifications or design adjustments may be necessary when using it with other vehicles based on the CC02 chassis.
With this FC Mount installed, the body can still be attached to the TAMIYA LAND CRUISER 40.
Please print with materials such as PLA or ABS, and tap the holes on the sides of the FC Plate and Device Plate for use.
The holes on the sides of the Device Plate aligned with the FC Plate are 15mm deep, and the Stand parts have a thickness of 4mm. Assemble using 3mm bolts of any desired length.
| CC02-Device-plate-V01.stl | 130.0KB | |
| CC02-FC-Plate-V01.stl | 286.2KB | |
| CC02-stand_4mm-V01.stl | 40.9KB |
