Tacoma Key Adaptor 3D Printer Model
The file 'Tacoma Key Adaptor 3D Printer Model' is (stl) file type, size is 96.3KB.
The file 'Tacoma Key Adaptor 3D Printer Model' is (stl) file type, size is 96.3KB.
I printed this because i couldnt use the key alone to unlock the tailgate because the dexterity in my fingers is all but gone.
the intent is to print the item and put the key (an extra one i had printed by a locksmith for under 15$) into the clamshell and glue in areas where it wont adhere to the key. that way if the 3d printed part ever fails or becomes dirty it can be cut off and replaced. there is no intent to add glue to keep the part and the key as one. .
Tacoma key for door.stl - has the cut out for the door handle and will operate all 3 (door, tailgate, and glovebox)
Tacoma Key for Tailgate and Glovebox.Stl - will only insert enough to open the glovebox and tailgate, the handle to the door will interfere with it being inserted enough to be usable for the doors.
| Tacoma_Key_for_door.stl | 198.2KB | |
| Tacoma_Key_tailgate_and_glovebox.stl | 227.8KB |
