Tablet/Screen Adaptor For DJI RC Pro 3D Printer Model
The file 'Tablet/Screen Adaptor For DJI RC Pro 3D Printer Model' is (3mf,stl) file type, size is 284.0KB.
The file 'Tablet/Screen Adaptor For DJI RC Pro 3D Printer Model' is (3mf,stl) file type, size is 284.0KB.
I have yet to put an actual Screen on this but it does fit nicely on my DJI RC Pro.
You need:
2 Screws M3x10 (can be longer if you want)
2 Screws M4x6
2 Screws M5x15 (can be max 20mm long)
1 Screw 1/4inch
Except for “Platte Unten” everything can be Printed in the Orientation it comes in.
You should need Supports only for “Bildschirm adapter”, i set mine to Everywhere with an Overhang angle of 80°.
The 1/4 inch Screw needs to be forced through as mine had a Small area with no Thread wich means it just stays there and can rotate freely.
The other Screws screw right into the Plastik, it worked for me but your luck my vary based on your Printsettings.
| Bildschirm_adapter.3mf | 46.5KB | |
| Bildschirm_adapter.stl | 186.1KB | |
| Halter.3mf | 77.0KB | |
| Halter.stl | 277.6KB | |
| Platte_Unten.3mf | 19.4KB | |
| Platte_Unten.stl | 74.9KB |
