Tabletop Spool Holder 3D Printer Model
The file 'Tabletop Spool Holder 3D Printer Model' is (stl) file type, size is 12.3KB.
The file 'Tabletop Spool Holder 3D Printer Model' is (stl) file type, size is 12.3KB.
Since I had my spool laying on the bottom of my printer and the filament was always twisting and curling, I looked on thingiverse for a simple tabletop spool holder and couldn't find any that would be useful to me. I'm sharing this model I made in case anyone needs it and doesn't have many tools around.
The model is to be printed in two copies, one for each side. To join both sides I used a 25mm diameter PVC pipe I had laying arround - with a 25,3mm designed hole the pipe slips right into place. The part was dimensioned to fit a 220mm diameter spool.
Since I didn't want the spool tipping in the middle of the print I decided to close the support on top. That might difficult the spool change but it definitely holds it in place as expected.
| Spool_holder_table-HALF.stl | 51.8KB |
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD] 3D Printer Model](https://res.3axis.co/5d4b6795-2609-4854-b5cc-f9865fc52399/images/8a81ed41-a0b5-4891-b5e0-f7dc14cb390d_thumb.jpg)
