A kinetic sculpture Inspired from David C Roy.
Designed it from scratch using Fusion 360, Custom made bevel gearbox that rotates two discs with single motor.
Motor Required : N20 Micro geared motor, 30 RPM
Power this using a variable power supply or a 3v cell(motor speed will vary)
Print Instructions :
All gears and shafts : At least 5 shells of .12 mm layer
All other parts : 2 Perimeter and 3 top/Bottom layers.
I printed everything using PLA.
Use M3 10mm Screws to attach gearbox, face and casing.
Video in Action :https://youtu.be/CgGYp8l1SYI
Assembly Instructions : https://youtu.be/9bm7wZqtjXM
| backwheel.stl | 412.8KB | |
| back_shaft.stl | 171.3KB | |
| Back_Shaft_Short.stl | 147.1KB | |
| base.stl | 113.9KB | |
| bottom.stl | 334.8KB | |
| coverhousing.stl | 684.0B | |
| face.stl | 104.0KB | |
| frontwheel.stl | 534.3KB | |
| front_shaft.stl | 83.7KB | |
| Front_Shaft_Short.stl | 157.9KB | |
| Gear2.stl | 205.4KB | |
| Gear2Mirror.stl | 197.2KB | |
| housing.stl | 99.3KB | |
| Motor_Case.stl | 69.6KB | |
| Motor_Gear.stl | 180.5KB |
