Tabletop Building For 32 Mm SciFi 3D Printer Model
The file 'Tabletop Building For 32 Mm SciFi 3D Printer Model' is (stl) file type, size is 1.8 MB.
The file 'Tabletop Building For 32 Mm SciFi 3D Printer Model' is (stl) file type, size is 1.8 MB.
This is my SciFi Building. I made it for the tabletop skirmisher Infinity. It's size is 210.5 x 238 x 169.9 mm. The single Parts are max 88 mm in square. Only the Roofs are larger (Large Roof is184 x 184 mm).
I sliced it with Cura. First printing were with failures. The mesh fix-Tools were causing the failures. With all disabled I had absolutely no Problems printing it.
| G1_connect.stl |
| G1_corner.stl |
| G1_down_back_1.stl |
| G1_down_back_2.stl |
| G1_down_front_1.stl |
| G1_down_front_2.stl |
| G1_down_left_1.stl |
| G1_down_left_2.stl |
| G1_down_left_connect.stl |
| G1_down_right_1.stl |
| G1_down_right_2.stl |
| G1_down_right_connect.stl |
| G1_down_roof_.stl |
| G1_up_back_1.stl |
| G1_up_back_2.stl |
| G1_up_roof_.stl |
| G1_up_window_1.stl |
| G1_up_window_2.stl |
| G1_up_window_3.stl |
| G1_up_window_4.stl |
