This customizable tablet holder can be mounted on desks, beds, in the bathroom, in the kitchen, etc.
Assembling instructions:
- Print as many connecting elements and flat screws as you need.
- Print 3 big screws and the 3 parts of the the tablet holder. (Note: check at first whether you need the regular parts or the mirrored parts).
- Put the connecting elements of the arm together and fix it with flat screws (use a big screwdriver or a coin).
- Mount the connecting element 90° (flat screw) on the arm (flat screw).
- Connect the parts of the tablet holder (part left + part middle + part right) and adjust the width of your tablet by sliding the middle part between the left and right part (fix it with glue, if you like, not necessary).
- Fix the tablet holder with a big screw to the 90° connecting element and adjust it as you need.
- Mount the assambled parts on the ground connector and use a big screw to fix the arm. If you tighten the screw, the arm can't rotate anymore. Adjust the arm as you need it.
- Mount the ground connector on your desk, bed, etc. and use a big screw to fix it.
Have fun and enjoy!
If you like this design, a tip would be fine :-)!
