Table Clamp Multi-holder 3D Printer Model
The file 'Table Clamp Multi-holder 3D Printer Model' is (stl,gcode) file type, size is 3.3MB.
The file 'Table Clamp Multi-holder 3D Printer Model' is (stl,gcode) file type, size is 3.3MB.
table clamp multi-holder.
a dovetail on the back is to attach aby holder you want.
i included a usb/sd adapter i made for my personal use as an example.
securely clamps to table from sizes 18mm to 32mm.
adjust the 2 screws to the table size and tightness you want then tighten the nuts to secure.
minimum supports.
i included the gcode i used.
i used prusaslicer to do the gcode with the threaded parts are .2 layer height and the others are .28 to cut print time, but you do you.
| b.stl | 214.3KB | |
| clamp_mh_2h48m_0.28mm_210C_PLA_ENDER3V2.gcode | 6.3MB | |
| l.stl | 59.5KB | |
| nx2.stl | 133.6KB | |
| p.stl | 812.3KB | |
| p1.stl | 903.6KB | |
| t.stl | 162.6KB | |
| usbh.stl | 40.1KB | |
| usbmhs4.stl | 2.4MB |
