This mount allows you to mount the Samsung Tab A7 (10.4inch) to the wall, with both charging capability and allows it to be removed for remote use.

INSTRUCTIONS:

Because of the tight tolerances you might need to sightly modify the model, this is why I added the fusion files. Don't modify by more than 0.2mm at a time between test prints as at this scale it's a lot. You will need support while printing the frame, it is really easy to remove with a flat head screw driver. The Folder will have both a Full version for big printers and a half version for smaller printers. The model that is cut in half also comes with seam covers to make the mount seamless. The seam covers are compatible with the full version if you like the design.

The Mount doesn't go into the wall except the rail for the button, this needs to be mounted flush with the wall. Before mounting the frame make sure the button can move freely, when I mounted mine I glued the rail to the frame before mounting it to ensure smooth movement.

Remember to screw in all the screws of the frame completely and sand or file them flush to make sure they don't scratch the back of the tablet.

The cable I used for this project is an angled USB-C cable I found on amazon, If you can't buy the exact one you might need to do some slight modifications to the frame. The cable is designed to go into the wall so make sure you run the cable before mounting the frame. To hold the cable in place you will need to print the connector spacer, this is designed to keep the connector in place when the tablet gets docked.
This is the cable I used:

https://www.amazon.com.au/gp/product/B099RC7S6R/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

For issues or potential upgrades feel free to contact me at [email protected]. I can also do custom modifications for a fee. I would love to see your completed mounts so please send me a photo of your project.