There are files for the complete model AND front and back pieces that will print without supports.

thingiverse lost the zip file. Go to the Thing Files tab and download the individual files.

If you want to make a taller stick/staff, grab my 1" cane coupler from here:

https://www.thingiverse.com/thing:3810485

Also, check out my 1" wall mount clips for displaying your canes/sticks: https://www.thingiverse.com/thing:3845550

You can make an awesome solid oak cane / walking stick for about $7. In addition to the printed topper of your choice you will need a 1” oak dowel which costs about $6 at Home Depot and a 1” rubber leg tip – about $4 for 4 of them. Links below are just for your reference so you know what to buy:

1” Oak Dowel: https://www.homedepot.com/p/Builder-s-Choice-1-in-x-36-in-Oak-Round-Dowel-HDDO136/206184686

1” Leg Tip: https://www.amazon.com/gp/product/B000QD30TE

The topper .stl file is sized for the 1” dowel if printed at 100%. If you want to use for a different size stick – just adjust accordingly.

I print at 20% infill and then paint and coat with a 2-part epoxy resin to add the deep gloss and strength.

https://www.amazon.com/gp/product/B07BM9LHRB

Just print the topper, glue to the finished dowel (sand and clear coat)with desired adhesive (I just use some of the 2-part resin I have mixed up for the final topper coat. You will end up with an awesome walking stick – or more if you are into collecting as I will be doing a lot of these.